Resolve ovsdb-server Not Running Error in Open vSwitch: Fix WARNING:root Message
Oh, dear! If you’re reading this, chances are you’ve come across that pesky “WARNING:root:cannot call open vswitch: * is not running” error. Now, don’t go and panic just yet! This ain’t the end of the world, but it sure can make things a bit tricky when you’re trying to get Open vSwitch up and running. Let me tell you, it happened to me too, when I was fiddlin’ around with my server, trying to get things sorted out on my Raspberry Pi running Ubuntu. It’s a bit of a nuisance, but with a little patience, you’ll get it all figured out. So, sit tight and I’ll walk you through it step by step.
First things first, when you see that warning, it’s usually because the ain’t runnin’. Now, what in the world is that? Well, it’s a service that helps Open vSwitch do its job, and if it ain’t runnin’, your network switches won’t work right. Simple as that. You’ll need to check the status of this service, and if it’s down, you’ll need to give it a little nudge to get it back up.
So, here’s what you gotta do:
- First, open up your terminal. You know, the black screen with all those letters and numbers that sometimes makes you feel like a wizard?
- Type in the command: sudo systemctl status ovsdb-server
- If it says the service ain’t running, you’ll need to start it up. To do that, type in: sudo systemctl start ovsdb-server
- Once it’s started, you can check if it’s running by typing: sudo systemctl status ovsdb-server again.
If you’re still gettin’ that same old warning, it might be a good idea to check if your system’s up to date. Sometimes, when things get out of whack, an update can help fix the problem. Try runnin’ these commands:
- sudo apt update – This makes sure all your software is up to date.
- sudo apt upgrade – This will upgrade the packages that need it.
Now, if you’ve done all that and you’re still stuck, it might be time to reinstall Open vSwitch. It’s a bit of a hassle, but it could do the trick. You can reinstall Open vSwitch by running:
- sudo apt-get install –reinstall openvswitch-switch
Once you’ve done that, restart your system. Sometimes a good ol’ reboot can shake off the bugs. If all goes well, that warning should be gone, and your Open vSwitch will be up and running smooth as butter.
But hold on, there’s one more thing I should tell you. If you’ve been messing around with OpenStack or other services on your machine, sometimes Open vSwitch can stop workin’ just like that. You might need to check your system for conflicts or missing dependencies. You can run some commands like sudo netplan apply or apt-file search ovsdb to make sure everything is set up correctly. If you see anything fishy, fix it, and try again.
So, to wrap it all up: don’t let that warning get you down. Check the service, update your system, and reinstall Open vSwitch if need be. And if all else fails, give it a reboot. You’ll be back on track in no time!
Remember, even though this stuff sounds complicated, it ain’t as bad as it seems once you break it down step by step. So, roll up your sleeves, and let’s get that ovsdb-server runnin’ again!
Tags:[Open vSwitch, ovsdb-server, Ubuntu, Raspberry Pi, error, fix, networking]
Original article by the Author:Simo,If you intend to republish this content, please attribute the source accordingly:https://www.suntrekenergy.com/1860.html