AC Fan Not Spinning Outside But Inside Works? Troubleshoot Your Unit Now!
Okay, so here’s the deal. I noticed my AC was acting up. Stepped outside and bam, the fan on the outside unit wasn’t spinning. But here’s the kicker – the inside unit was humming along just fine.
First things first, I flipped the main power switch for the AC unit. You know, the old “turn it off and on again” trick. Sometimes that’s all it takes, right? No dice, though. Still no movement from the fan.
Next, I went to check the circuit breaker. Maybe it tripped and cut off power just to the outside unit. I found the right breaker in the panel, and nope, it was in the “on” position. Flipped it off and on just to be sure, but that didn’t do anything either.
Feeling a bit more adventurous, I decided to take a closer look at the condensing unit itself. Maybe something obvious was blocking the fan, like a rogue branch or something. I gave it a good once-over, poking around carefully. Didn’t see any obvious damage or anything stuck in the fan blades. The fan blades weren’t spinning freely, but nothing seemed to be physically blocking them. I thought, man, hope this isn’t an expensive fix.
- Checked for any visible damage to the unit.
- Looked for anything blocking the fan blades.
Alright, time to dig a bit deeper. I remembered reading somewhere that a busted capacitor can cause this kind of problem. But honestly, I’m not exactly an electrician. Still, I figured I’d take a peek. I cautiously removed the access panel on the unit. Inside, I spotted a bunch of wires and this thing that looked like a big battery – that’s probably the capacitor.
I also looked for a reset button. Some AC units have them, and it’s supposed to be near the bottom of the outside unit. I scanned the lower edge, and then behind a service panel. Couldn’t find a reset button on mine, but maybe yours has one.
After that, I took a look at the motor itself. I mean, if the motor’s shot, that’s obviously going to stop the fan. I couldn’t really tell if it was burned out just by looking at it. There was no burning smell, which I guess is a good sign.
What I Didn’t Do:
- I didn’t mess with any wires. Electricity scares me, no thanks.
- I didn’t try to force the fan to spin. Seemed like a good way to break something.
At this point, I figured it was time to call in a pro. I’m not equipped to deal with electrical issues or anything too complex. If it’s something like a bad capacitor or a dead motor, that’s way beyond my DIY skills. Hopefully, it’s a simple fix. So I called my local HVAC guy, and he’s coming out tomorrow. I’ll update you when I know more. Fingers crossed it’s not too expensive!
Original article by the Author:Williams,If you intend to republish this content, please attribute the source accordingly:https://www.suntrekenergy.com/6374.html
相关推荐
-
Coke Freestyle Machine Monthly Cost: Budgeting for Your Business
Well, howdy there! Let’s talk about them fancy Coke Freestyle machines, you know, the ones with all them different soda flavors. Folks always wonderin’ how much it costs to keep one of them things runnin’ every month. It ain’t just a one-time thing, y’know. It’s like feedin’ a cow – gotta keep doin’ it. First off, gettin’ one of them machines ain’t cheap. I heard tell they can cost a pretty penny, anywhere from a couple thousand dollars to over ten thousand dollars! Some fancy new ones even more! Shoot,…
-
Who is Running for 20th Circuit Court Judge Collier County? Heres the List!
Okay, so, today I wanted to dive into something that’s been on my mind lately: the 20th Circuit Court Judge election in Collier County. It’s a bit of a niche topic, but stick with me, because figuring out who’s running for these local positions can be a real head-scratcher. And I documented every step I’ve done. First things first, I started with a broad search online. Just typing in “who is running for 20th circuit court judge collier county” into the search bar. I figured that would give me a…
-
Get Your On Cloudmonster Womens Running Shoe – Black/Magnet – Size 7 Today!
Alright, let’s talk about these here Cloudmonster running shoes, the black and magnet ones, size 7, you know? I ain’t no fancy shoe expert or nothin’, but I know what feels good on my feet, and that’s all that matters, right? First off, they got this real thick sole, like, real thick. They call it “max-cushioned” or somethin’. I just call it comfy. Like walkin’ on clouds, I guess, just like the name says. Cloudmonster, yeah, that kinda makes sense. It’s like you got a big ol’ pillow under your…
-
Hybrid Athlete Training Without Running: Achieve Strength and Endurance
[ Oh, let me tell you, this hybrid athlete thing is mighty interestin’. You don’t always have to run, you know. Some folks just lift them weights and still do well in other areas. If you’re a strong one, like a weightlifter, you can still mix in some other stuff without poundin’ the pavement. Now, hybrid trainin’ means you do a bit of this and a bit of that. Like, you might lift heavy one day, then do some bike ridin’ the next. Ain’t no rule sayin’ you gotta run…
-
Snag These Limited Run Manhwa: Theyre Selling Out Fast!
Hey there, y’all! Let’s yak about this thing called “limited run manhwa.” Don’t rightly know what all them fancy words mean, but I reckon it’s like them picture books the young’uns read, only they’re from some far-off place and ain’t got many copies. Sounds right scarce, don’t it? Now, I hear tell these “limited run manhwa” stories are somethin’ else. One I heard about is called, well, “Limited Run.” Catchy name, ain’t it? Anyways, it’s about this young fella, Seo Yeon-Oh, who’s tryin’ to be an actor. Bless his heart,…
-
2012 liberty when a/c runs there’s a loud rattle noise
Well, you know, there’s this thing when you turn on your A/C, and you hear that awful rattling noise. It’s enough to make you wanna go bang on it, but don’t do that! The A/C ain’t like an old washing machine, you can’t just smack it and make it stop. No, it’s a little more complicated than that. You might not be able to see what’s causing that noise, but I can tell you, it’s usually something that’s come loose inside. First thing you gotta think about is them screws…
-
Where to Run in Ewing, KY: Explore the Best Trails and Paths
Well now, if you’re lookin’ for the best place to run in Ewing, Kentucky, you’ve come to the right place, dear. I’ll tell ya, Ewing’s not some big fancy city, but it sure does have its charm, and there’s plenty of good spots to get your feet movin’ if you like a good run. Don’t you worry, I’ll give ya a few ideas on where to get your jog on in this little ol’ town. Now, Ewing is a small town, just around 295 people call it home, so don’t…
-
Hammerhead Twister Hi-Run Tires 20×7-8 Specs and Performance Guide
Well, let me tell ya ’bout these here hammerhead twister hi-run tires 20×7-8. I ain’t no expert, mind you, but I know a thing or two ’bout gettin’ work done around the yard. And good tires? They’re a must. First off, these tires, they’re for, you know, lawn mowers and them garden tractors. The kind you use to cut the grass and haul stuff around. They ain’t for no big ol’ farm equipment, no sir. Just the regular stuff for keepin’ your yard lookin’ nice. Now, I hear tell these…
-
Atlantic Beach Shocker： Boat Runs Ashore, Witnesses Describe Chaos
Oh, let me tell ya, folks down by Atlantic Beach had quite the sight this Saturday! Picture this: a big ol’ boat just running itself right up on the shore. Can ya imagine that? Right smack on the sand, like it got lost or somethin’! Now, I don’t know what kind of folks were on it, but I bet they had quite the scare. You don’t see a boat come on land every day, no sir. People started gatherin’ around, all starin’ and whisperin’. Some folks were pointin’, others takin’…
-
DIY: Install a Running Board for Romex? Learn How Right Now!
Today, I decided to tackle the wiring in my workshop. I’ve been putting this off for a while, and it’s finally time to get it done. I needed to run some Romex wiring, and I figured using a running board would make things a lot easier and neater. This was a project that I was not exactly looking forward to, but hey, it had to be done. First things first, I had to gather all my tools and materials. I made sure I had my trusty drill, a bunch of…